PAKISTAN  STEEL
MARKETING  DEPARTMENT
NO: 2019/05            June 27, 2019
PRICES   OF   PAKISTAN   STEEL    PRODUCTS
EFFECTIVE FROM 27.06.2019
Ex-Mill Price in Rs. /Tonne 
(Excluding Sales Tax/Excise Duty)
1.   BILLETS / BLOOMS               
a) Prime                
i ) All  Grades including SAE 1006,  except SUP Series, or as specified below:-
  150 x 150mm         92,454  
  125 x 125mm         97,545    
100 x 100 / 105 x 105mm 107,730
90 x 90 / 80 x80 / 75 x 75mm 109,184
65 x 65 / 50 x 50 mm 112,094
ii) Grade  SUP  6  &  7    
100 x 100 mm 110,567
    75 x 75 mm 110,946
iii) Grade   SUP   9
100 x 100 mm  111,829
75 x 75 mm 112,208
Bloom 260x260 mm 81,237
b) Secondary Billet
i) Prices of All Secondary/Rejected/Off grade/OCB Billets will be Rs. 500 PMT 
less than the price of Prime Billets for respective profile and grade.
ii) Grade charges will not apply on Secondary/Rejected/Off grade/OCB Billets.
Extra Charges for special grades of Billets/Ingot Square
a) ASTM A-615, G-60 (Rolled) & NSSR 3,500
b) ASTM A-615 G-60 (Cast), ASTM A-572 G-50 & G-40 (Rolled) 3,100
c) ASTM A-615  G-75 2,800
d) WR-20 and above, SAE 1018, A2AL, SS A 21  2,000
                   e) ASTM A 706 4,500
f) SAE 1008,1010,WR-8 2,500
2.   HOT ROLLED PRODUCTS
a)   Hot Rolled Coils - Prime (Mill Edge)
i) All  grades  except   Grade-SG 26/255, Lloyds Grade 'A',
Upto 2 mm x 1000 / 1220 107,677
Over 2.00 to 2.35 x 1000 / 1220 107,677
Over 2.35 to 2.65 x 1000 / 1220 107,360
Over 2.65 to 3.00 x 1000/1220 107,360
Over 3.00 to 3.65 x 1000/1220  105,781
Over 3.65 to 5.00 x 1000/1220/1500 105,464
Over 5.00 to 6.00 x 1000/1220/1500 105,939
Over 6.00 mm and above 106,728
Note:
1 Pickled and Pickled & Oiled charges @ Rs 2,500/- PMT shall be applicable over and above the prices of
respective size & grade of Prime Quality and Secondary-A material only.
2 Prices of all Secondary-A Hot Rolled Products shall be charged @ 1% below the respective 
thickness-wise prices of Prime Quality Grade HR-1.
3 Prices of Secondary-B Hot Rolled Products shall be charged @7% less than the prices of Prime
(Grade HR-1) Products in respective dimension and year of manufacture.
4 Extras charges irrespective of year of manufacture:
a)    For Grades:
                 i)    5LB 500
                 ii)   X-42 to X-46 2,000
                 iii)  X-52/X-56/X-60/X-65 (PSL-2) 5,000
                iv)  X-52/X-56/X-60/X-65 (PSL-1) 3,000
                v)   X-70 8,100
                vi)   RST37-2Cu/1543 & RST52-3/1543 8,600
                vii)  SG-26/255  2,000
               viii)  SAPH-440 6,700
                ix)  Lloyd's Grade A 7,600
b)   For Shearing  300
c)   For Slitting 1,425
d)   Additional charges for special services to M/s.BWL 4,750
b) Chequered Material (in all grades & thicknesses)
Tear Drop Pattern
Prime
Upto 2.8 mm
120,942
Over 2.8 Upto 3.00 mm 119,567
Over 3.00 mm 119,155
Note:
1 Prices of all secondary A Chequered Material (in all grade & thickness)shall be charged @1%
below the respective thickness wise prices.
2 Prices of all secondary B Chequered Material (in all grade & thickness)shall be charged @4%
below the respective thickness wise prices.
c) U Channels (HR-235/275)
1 8x250x75x12000 132,272
2 8x200x75x12000 132,272
3 8x150x75x10000 132,272
d)  M.S.  Slabs
Mixed  grade  &  thicknesses irrespective of year of manufacture
Prime 84,120
Un-Rollable Slab Pin Hole 74,128
Short length (1-2 M) 72,627
Rejected/Axial crack/LFC/6000 mm 67,374
Rejected Slab <3000 mm 71,126
Extra charges :
for any specific grade other than mixed grade 1,000
e) MS Thick Plates (in all grades irrespective of year of manufacture)
Upto 29 mm 90,831
Over 29 Upto 49 mm 93,932
Over 49 Upto 64 mm 93,932
Over  64 Upto 99 mm 93,156
Over 99 mm  89,281
3.  COLD ROLLED PRODUCTS
a) Cold Rolled Coils - Prime
i) All grades except SPCEN.
Upto  0.55 mm x 915 / 1220 / 950
114,727
Over  0.55  to  0.60 x 915 / 1220 / 950 112,791
Over  0.60  to  0.65 x 915 / 1220 / 950 112,516
Over  0.65  to  0.70 x 915 / 1220 / 950 112,238
Over  0.70  to  0.75 x 915 / 1220 / 950 111,961
Over  0.75  to  0.80 x 915 / 1220 / 950 111,823
Over  0.80  to  0.90 x 915 / 1220 / 950  112,238
Over  0.90  to  1.00 x 915 / 1220 / 950 112,100
Over 1.00   to  1.20 x 915 / 1220 / 950                  110,717
Over 1.20  to   1.6   x 915 / 1220 / 950 110,441
Over 1.6    to 1.8 x 915/ 1220 / 950 110,027
Over 1.8 mm and above 109,472
Note:
1 Prices of Prime Quality Un-annealed Cold Rolled Products will be@ Rs. 500/= PMT less than the 
prices of Prime Quality Cold Rolled Products.
2 Prices of Prime Quality Cold Rolled Products(annealed/unannealed) weight less than 2.00 M. Ton 
shall be charged @ 1% below the respective thickness-wise prices of prime quality in the specific grade
3 Prices of all  Secondary-A Cold Rolled products annealed/unannealed shall be charged @ 1%  below the 
respective thickness-wise prices of Prime quality  Grade CR-1.
4 Prices of Secondary-A Cold Rolled products annealed/unannealed weight less than 2.00 MTN shall be 
charged @ 2% below the respective thickness-wise prices of prime quality Grade CR-1.
5 Prices of Secondary-B Cold Rolled Products annealed/unannealed shall be charged @7% less than the 
prices of Prime(Grade CR-1) Products in respective dimension and year of manufacture.
6 Extras charges irrespective of year of manufacture:
a) for Grades
         i)  SPCEN 5,500
         ii)  RST-12.03-Cu3  6,000
         iii) CR3 500
         iv) CR4 1,000
b)  for Shearing 600
c)  for Slitting 2,000
4.   GALVANISED PRODUCTS
a) Galvanised Coils -Prime (all grades)    
Upto 0.55  x  915 / 950 / 1220 124,768
Over 0.55 & Upto  0.60  x  915 / 950 / 1220 124,018
Over 0.60 & Upto  0.65  x  915 / 950 / 1220 123,115
Over 0.65 & Upto  0.70  x  915 / 950 / 1220 122,363
Over 0.70 & Upto  0.75  x  915 / 950 / 1220 121,612
Over 0.75 & Upto  0.80  x  915 / 950 / 1220 121,012
Over 0.80 & Upto  0.85  x  915 / 950 / 1220 120,260
Over 0.85 & Upto  0.90  x  915 / 950 / 1220 119,507
Over 0.90 & Upto 1.00   x  915 / 950 / 1220 118,756
Over 1.00 & Upto 1.5    x    915 / 950 / 1220 118,156
Over 1.5 mm 117,403
Note:
1 Prices of Prime Quality Galvanized Products weight less than, 2.00 M. Ton, shall be charged @ 1% 
below the respective thickness-wise prices of prime quality in the specific grade. 
2 Prices of  all Secondary-A Galvanised products shall be charged @ 2%  below the respective
thickness-wise  prices of Prime quality Grade G-01.
3 Prices of all Secondary-A Galvanised product weight less than 2.00 MTN shall be
charged @ 4% below the respective thickness-wise  prices of  prime quality Grade-G-01.
4 Prices of Secondary-B Galvanized Products shall be charged @ 10 % less than the prices of Prime
(Grade G-01) Products in respective dimension and year of manufacture.
5.   UNSORTED PRODUCTS            
Product Code        
 
   
a) HR 954 Un-sorted End Cuts (HR)       95,010    
  956 Rejected HR Sheet Un-sorted       96,042    
  957 Un-sorted Rej. HR Sheet (P&O)       96,336    
  958 Un-Sorted Rej. HR Chq. Sheet       106,376    
   
b) CR 951 Un-sorted End Cuts (CR.A) 98,845    
952 Un-sorted End Cuts (CR.T) 101,511    
953 Un-sorted End Cuts (CR U) 96,046    
961 Un-sorted Annealed Coil 94,978    
962 Un-sorted Temper Coil 97,379    
964 Un-sorted Un-Annealed Coil 94,978    
965 Un-sorted Rej. C.R. Sheet 103,242    
   
c) GP 955 Un-sorted End Cuts (GP) 99,402    
963 Un-sorted GP Coil 103,797    
6.  BY -PRODUCTS              
   (a) Pig  Iron
CPI  ( All types incl. imported) 61,120
CPI (off grade/CPI-S) 54,197
FPI - 5  /  6  / 5S /  6S / 5HMn  /  6HMn/ HSi/ Off Grade 64,271
FPI - 4  / 4S  / 4HMn 71,453
FPI - 3  /  3S  / 3HMn 71,453
FPI - 2  / 2S  /  2HMn 72,331
FPI - 1  /  1S  / 1HMn 72,713
Pig Iron Residue 43,462
Pig Iron (Dust) 41,572
Pig Iron Disc Scrap 48,124
   (b) Hard Coke
1.1  Coke Dust  ( 0 - 1 mm ) Bulk in Loose form 17,171
1.2  Coke Dust  ( 0 - 1 mm ) Packed in 50 kg Bags 18,192
2.    Coke Breeze (0 - 10 mm) 23,257
3.    Coke Breeze (0 - 15 mm) 28,600
4.    Coke Breeze  ( 0 - 20 mm ) 30,579
5.    Coke Breeze  ( 0 - 25 mm ) 38,105
6.    Coke Breeze  (10-15 mm) 39,954
7.    Coke 25mm to 80mm (Subject to availability) 64,512
8.    Coke Over 80mm 69,232
Note:
Extra charges @ Rs. 200/- PMT for allowing hand picking of Coke size +80mm by labours/workers
deployed by the buyers on their account shall be payable at the time of obtaining Delivery Order(s).
   (c) Ammonium  Sulphate
Bulk: in loose form 17,000
Packed: in 50 kg bags 17,300
   (d)   Coal Tar 38,000
   (e) HSD (Used) 59,500
   (f) Slag                
  Granulated         1,350    
BF Boulder Slag (BF waste: Product Code: 906) 140
Convertor Slag  1,000
Boulder Slag alongwith HMLR contents 1,190
  (g) Oxygen/Nitrogen    (in Cu.m.) 75
(h) HMLR           32,090    
(i) Runner Scrap         38,037    
(j) Steel Metal Ladle Residue (SMLR) Scrap       33,521    
(k) Steel Scrap Retrieved from Converter Slag 
i.      0-60mm 10,847
ii.     05-60mm 13,130
iii.     30-60mm 19,981
iv.    60-300mm 25,120
v.     Over 300mm 20,780
(l) Tar Bonded Dolomite (TBD) Bricks (In all grades/sizes/shapes) 34,000
(m) Chamote Powder 
i.   0-3mm 5,900
ii.  0-20mm 5,900
(n) Tundish Well Block CN-42 37,250
(o) Bricks Fire Clay in all sizes & Shapes  40,000
(p) i.   Calcined Dolomite (Dead Burnt Dolomite)            13,450
ii.  Calcined Lime (Burnt Lime) Size 0-10 mm    5,400
iii. Calcined Lime (Burnt Lime) Size 10-50 mm            5,400
(q) Mortar  41,000
(r) Burnt Refractory Bricks (Mixed) 11,500
   (s)   Bulk Hot Metal Skull       31977    
(t) Pressed & Bundled Steel Scrap       36537    
   (u)   Mis-Cast Steel Heavy Scrap       37679    
(v) Scarfing Cinder 7,073
Note:
i) The prices are subject to change without notice.
ii) Items, whose prices have not been indicated in this price list, are not to be offered for sale.
iii) All materials  shall be allocated subject to availability.