| PAKISTAN
STEEL |
|
|
|
|
|
|
|
|
| MARKETING DEPARTMENT |
|
|
|
| NO:
2019/01 |
|
|
March 14, 2019 |
|
|
|
|
|
|
|
|
|
|
|
|
| PRICES OF
PAKISTAN STEEL PRODUCTS |
|
|
|
| EFFECTIVE FROM
14.03.2019 |
|
|
|
|
|
|
|
|
|
|
|
|
Ex-Mill Price in Rs. /Tonne |
|
|
|
|
|
|
|
(Excluding Sales Tax/Excise Duty) |
|
|
|
| 1. BILLETS / BLOOMS |
|
|
|
|
|
|
|
| a)
Prime |
|
|
|
|
|
|
|
|
|
| i ) |
All Grades including SAE 1006, except SUP Series, or as specified below:- |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
150 x 150mm |
|
|
|
|
85,767 |
|
|
|
|
| |
125 x 125mm |
|
|
|
|
90,490 |
|
|
|
|
|
100 x 100 / 105 x 105mm |
|
|
|
99,938 |
|
|
|
|
|
90 x 90 / 80 x80 / 75 x
75mm |
|
|
|
101,287 |
|
|
|
|
|
65 x 65 / 50 x 50 mm |
|
|
|
103,987 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ii) |
Grade SUP
6 & 7 |
|
|
|
|
|
|
|
|
|
100 x 100 mm |
|
|
|
86,519 |
|
|
|
|
|
|
75 x 75 mm |
|
|
|
86,884 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| iii) |
Grade SUP
9 |
|
|
|
|
|
|
|
|
|
|
|
100 x 100 mm |
|
|
|
87,735 |
|
|
|
|
|
|
75 x 75 mm |
|
|
|
88,100 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Bloom
260x260 mm |
|
|
|
|
65,362 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| b)
Secondary Billet |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| i) |
Prices of All Secondary/Rejected/Off grade/OCB
Billets will be Rs. 500 PMT |
|
|
|
|
|
|
|
less than the price of Prime Billets for respective
profile and grade. |
|
|
|
|
|
|
| ii) |
Grade charges will not
apply on Secondary/Rejected/Off grade/OCB Billets. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extra Charges for special
grades of Billets/Ingot Square |
|
|
|
|
|
|
|
a) ASTM A-615, G-60
(Rolled) & NSSR |
|
|
|
3,500 |
|
|
|
|
b) ASTM A-615 G-60
(Cast), ASTM A-572 G-50 & G-40 (Rolled) |
|
3,100 |
|
|
|
|
c) ASTM A-615 G-75 |
|
|
|
2,800 |
|
|
|
|
d) WR-20 and above, SAE
1018, A2AL, SS A 21 |
|
|
|
2,000 |
|
|
|
| |
e) ASTM A 706 |
|
|
|
|
4,500 |
|
|
|
|
f) SAE 1008,1010,WR-8 |
|
|
|
2,500 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2. HOT ROLLED PRODUCTS |
|
|
|
|
|
|
|
| a) Hot Rolled Coils - Prime (Mill Edge) |
|
|
|
|
|
|
|
| i) |
All grades
except Grade-SG 26/255, Lloyds
Grade 'A', |
|
|
|
|
|
|
|
Upto |
2 mm x 1000 / 1220 |
|
|
|
105,904 |
|
|
|
|
Over |
2.00 to 2.35 x 1000 /
1220 |
|
|
|
105,904 |
|
|
|
|
|
Over |
2.35 to 2.65 x 1000 /
1220 |
|
|
|
105,603 |
|
|
|
|
|
Over |
2.65 to 3.00 x 1000/1220 |
|
|
|
105,603 |
|
|
|
|
|
Over |
3.00 to 3.65 x
1000/1220 |
|
|
|
104,103 |
|
|
|
|
|
Over |
3.65 to 5.00 x
1000/1220/1500 |
|
|
|
103,802 |
|
|
|
|
|
Over |
5.00 to 6.00 x
1000/1220/1500 |
|
|
|
104,253 |
|
|
|
|
|
Over |
6.00 mm and above |
|
|
|
105,003 |
|
|
|
|
| Note: |
|
|
|
|
|
|
|
|
|
|
| 1 |
Pickled and Pickled &
Oiled charges @ Rs 2,500/- PMT shall be applicable over and above the prices
of |
|
|
|
|
respective size &
grade of Prime Quality and Secondary-A material only. |
|
|
|
|
|
| 2 |
Prices of all Secondary-A
Hot Rolled Products shall be charged @ 1% below the respective |
|
|
|
|
|
thickness-wise prices of
Prime Quality Grade HR-1. |
|
|
|
|
|
|
|
| 3 |
Prices of Secondary-B Hot
Rolled Products shall be charged @7% less than the prices of Prime |
|
|
|
|
(Grade HR-1) Products in
respective dimension and year of manufacture. |
|
|
|
|
|
| 4 |
Extras charges
irrespective of year of manufacture: |
|
|
|
|
|
|
|
|
a) For Grades: |
|
|
|
|
|
|
|
|
|
i) 5LB |
|
|
|
500 |
|
|
|
|
ii) X-42 to X-46 |
|
|
|
2,000 |
|
|
|
|
iii) X-52/X-56/X-60/X-65
(PSL-2) |
|
|
|
5,000 |
|
|
|
|
iv) X-52/X-56/X-60/X-65 (PSL-1) |
|
|
|
3,000 |
|
|
|
|
v) X-70 |
|
|
|
8,100 |
|
|
|
|
vi) RST37-2Cu/1543 & RST52-3/1543 |
|
|
|
8,600 |
|
|
|
|
vii) SG-26/255 |
|
|
|
2,000 |
|
|
|
|
viii) SAPH-440 |
|
|
|
6,700 |
|
|
|
|
ix) Lloyd's Grade A |
|
|
|
7,600 |
|
|
|
|
b) For Shearing |
|
|
|
|
300 |
|
|
|
|
c) For Slitting |
|
|
|
|
1,425 |
|
|
|
|
d) Additional charges for special services to
M/s.BWL |
|
|
4,750 |
|
|
|
| b)
Chequered Material (in all grades & thicknesses) |
|
|
|
|
|
|
|
|
Tear Drop Pattern |
|
|
|
|
|
|
|
|
Prime |
|
|
|
|
|
|
|
|
|
|
Upto 2.8 mm |
|
|
|
|
114,839 |
|
|
|
|
|
Over 2.8 Upto 3.00 mm |
|
|
|
113,534 |
|
|
|
|
|
Over 3.00 mm |
|
|
|
|
113,142 |
|
|
|
|
| Note: |
|
|
|
|
|
|
|
|
|
|
| 1 |
Prices of all secondary A
Chequered Material (in all grade & thickness)shall be charged @1% |
|
|
|
|
|
below the respective
thickness wise prices. |
|
|
|
|
|
|
|
|
| 2 |
Prices of all secondary B
Chequered Material (in all grade & thickness)shall be charged @4% |
|
|
|
|
|
below the respective
thickness wise prices. |
|
|
|
|
|
|
|
|
| c)
U Channels (HR-235/275) |
|
|
|
|
|
|
|
|
| 1 |
8x250x75x12000 |
|
|
|
|
125,598 |
|
|
|
|
| 2 |
8x200x75x12000 |
|
|
|
|
125,598 |
|
|
|
|
| 3 |
8x150x75x10000 |
|
|
|
|
125,598 |
|
|
|
|
| d) M.S.
Slabs |
|
|
Mixed grade
& thicknesses irrespective
of year of manufacture |
|
|
|
|
|
|
Prime |
|
|
|
|
|
84,120 |
|
|
|
|
Un-Rollable Slab Pin Hole |
|
|
|
74,128 |
|
|
|
|
Short length (1-2 M) |
|
72,627 |
|
|
Rejected/Axial crack/LFC/6000 mm |
|
67,374 |
|
|
Rejected Slab <3000 mm |
|
71,126 |
|
|
Extra charges : |
|
|
|
|
|
|
|
|
|
for any specific grade
other than mixed grade |
|
|
|
1,000 |
|
|
|
| e)
MS Thick Plates (in all grades irrespective of year of manufacture) |
|
|
|
|
|
|
Upto 29 mm |
|
|
|
|
87,921 |
|
|
|
|
|
Over 29 Upto 49 mm |
|
|
|
90,922 |
|
|
|
|
|
Over 49 Upto 64 mm |
|
|
|
90,922 |
|
|
|
|
|
Over 64 Upto 99 mm |
|
|
|
90,171 |
|
|
|
|
|
Over 99 mm |
|
|
|
|
86,420 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3. COLD ROLLED PRODUCTS |
|
|
|
|
|
|
|
| a)
Cold Rolled Coils - Prime |
|
|
|
|
|
|
|
| i) |
All grades except SPCEN. |
|
|
|
|
|
|
Upto |
0.55 mm x 915 / 1220 / 950 |
|
|
|
|
|
|
|
|
|
Over |
0.55
to 0.60 x 915 / 1220 / 950 |
|
|
|
103,947 |
|
|
|
|
|
Over |
0.60
to 0.65 x 915 / 1220 / 950 |
|
|
|
103,685 |
|
|
|
|
|
Over |
0.65
to 0.70 x 915 / 1220 / 950 |
|
|
|
103,421 |
|
|
|
|
|
Over |
0.70
to 0.75 x 915 / 1220 / 950 |
|
|
|
103,158 |
|
|
|
|
|
Over |
0.75
to 0.80 x 915 / 1220 / 950 |
|
|
|
103,027 |
|
|
|
|
|
Over |
0.80
to 0.90 x 915 / 1220 / 950 |
|
|
|
103,421 |
|
|
|
|
|
Over |
0.90
to 1.00 x 915 / 1220 / 950 |
|
|
|
103,290 |
|
|
|
|
|
Over |
1.00 to
1.20 x 915 / 1220 / 950 |
|
|
101,975 |
|
|
|
|
|
Over |
1.20 to
1.6 x 915 / 1220 / 950 |
|
|
|
101,712 |
|
|
|
|
|
Over |
1.6 to 1.8 x 915/ 1220 / 950 |
|
|
|
101,318 |
|
|
|
|
|
Over |
1.8 mm and above |
|
|
|
100,791 |
|
|
|
|
| Note: |
|
|
|
|
|
|
|
|
|
|
| 1 |
Prices of Prime Quality
Un-annealed Cold Rolled Products will be@ Rs. 500/= PMT less than the |
|
|
|
|
prices of Prime Quality
Cold Rolled Products. |
|
|
|
|
|
|
|
| 2 |
Prices of Prime Quality
Cold Rolled Products(annealed/unannealed) weight less than 2.00 M. Ton |
|
|
|
|
shall be charged @ 1%
below the respective thickness-wise prices of prime quality in the specific
grade |
|
|
|
| 3 |
Prices of all Secondary-A Cold Rolled products
annealed/unannealed shall be charged @ 1%
below the |
|
|
|
|
respective thickness-wise
prices of Prime quality Grade CR-1. |
|
|
|
|
|
|
| 4 |
Prices of Secondary-A
Cold Rolled products annealed/unannealed weight less than 2.00 MTN shall
be |
|
|
|
|
charged @ 2% below the
respective thickness-wise prices of prime quality Grade CR-1. |
|
|
|
| 5 |
Prices of Secondary-B
Cold Rolled Products annealed/unannealed shall be charged @7% less than
the |
|
|
|
|
prices of Prime(Grade
CR-1) Products in respective dimension and year of manufacture. |
|
|
|
| 6 |
Extras charges
irrespective of year of manufacture: |
|
|
|
|
|
|
|
|
a) for Grades |
|
|
|
|
|
|
|
|
|
i)
SPCEN |
|
|
|
|
5,500 |
|
|
|
|
ii)
RST-12.03-Cu3 |
|
|
|
6,000 |
|
|
|
|
iii) CR3 |
|
|
|
|
500 |
|
|
|
|
iv) CR4 |
|
|
|
|
1,000 |
|
|
|
|
b) for Shearing |
|
|
|
|
600 |
|
|
|
|
|
c) for Slitting |
|
|
|
|
2,000 |
|
|
|
| 4. GALVANISED PRODUCTS |
|
|
|
|
|
|
|
| a)
Galvanised Coils -Prime (all grades) |
|
|
|
|
|
|
|
|
Upto 0.55 x
915 / 950 / 1220 |
|
|
|
115,707 |
|
|
|
|
Over 0.55 & Upto 0.60
x 915 / 950 / 1220 |
|
|
|
115,011 |
|
|
|
|
Over 0.60 & Upto 0.65
x 915 / 950 / 1220 |
|
|
|
114,174 |
|
|
|
|
Over 0.65 & Upto 0.70
x 915 / 950 / 1220 |
|
|
|
113,477 |
|
|
|
|
Over 0.70 & Upto 0.75
x 915 / 950 / 1220 |
|
|
|
112,781 |
|
|
|
|
Over 0.75 & Upto 0.80
x 915 / 950 / 1220 |
|
|
|
112,223 |
|
|
|
|
Over 0.80 & Upto 0.85
x 915 / 950 / 1220 |
|
|
|
111,526 |
|
|
|
|
Over 0.85 & Upto 0.90
x 915 / 950 / 1220 |
|
|
|
110,828 |
|
|
|
|
Over 0.90 & Upto
1.00 x 915 / 950 / 1220 |
|
|
|
110,131 |
|
|
|
|
Over 1.00 & Upto
1.5 x 915 / 950 / 1220 |
|
|
|
109,575 |
|
|
|
|
Over 1.5 mm |
|
|
|
|
108,877 |
|
|
|
| Note: |
|
|
|
|
|
|
|
|
|
| 1 |
Prices of Prime Quality
Galvanized Products weight less than, 2.00 M. Ton, shall be charged @ 1% |
|
|
|
|
below the respective
thickness-wise prices of prime quality in the specific grade. |
|
|
|
|
| 2 |
Prices of all Secondary-A Galvanised products shall
be charged @ 2% below the respective |
|
|
|
|
thickness-wise prices of Prime quality Grade G-01. |
|
|
|
|
|
|
|
| 3 |
Prices of all Secondary-A
Galvanised product weight less than 2.00 MTN shall be |
|
|
|
|
|
charged @ 4% below the
respective thickness-wise prices
of prime quality Grade-G-01. |
|
|
|
| 4 |
Prices of Secondary-B Galvanized Products shall be
charged @ 10 % less than the prices of Prime |
|
|
|
|
(Grade G-01) Products in respective dimension and
year of manufacture. |
|
|
|
|
|
|
|
|
|
|
|
| 5. UNSORTED PRODUCTS |
|
|
|
|
|
|
|
| Product Code |
|
|
|
|
|
|
|
|
| a) HR |
954 |
Un-sorted End Cuts (HR) |
|
|
|
93,876 |
|
|
|
|
| |
956 |
Rejected HR Sheet
Un-sorted |
|
|
|
94,855 |
|
|
|
|
| |
957 |
Un-sorted Rej. HR Sheet
(P&O) |
|
|
|
95,135 |
|
|
|
|
| |
958 |
Un-Sorted Rej. HR Chq.
Sheet |
|
|
|
101,009 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| b) CR |
951 |
Un-sorted End Cuts (CR.A) |
|
|
|
90,683 |
|
|
|
78.61 |
21.39 |
|
|
|
952 |
Un-sorted End Cuts (CR.T) |
|
|
|
93,218 |
|
|
|
|
|
|
953 |
Un-sorted End Cuts (CR U) |
|
|
|
88,020 |
|
|
|
#### |
|
|
|
961 |
Un-sorted Annealed Coil |
|
|
|
87,005 |
|
|
|
|
|
|
962 |
Un-sorted Temper Coil |
|
|
|
89,288 |
|
|
|
70550 |
15,093 |
55,457 |
|
|
964 |
Un-sorted Un-Annealed
Coil |
|
|
|
87,005 |
|
|
|
|
|
|
965 |
Un-sorted Rej. C.R. Sheet |
|
|
|
94,865 |
|
|
|
68000 |
14,547 |
53,453 |
|
|
|
|
|
|
|
|
|
|
|
|
53453 |
|
| c) GP |
955 |
Un-sorted End Cuts (GP) |
|
|
|
92,183 |
|
|
|
|
|
|
963 |
Un-sorted GP Coil |
|
|
|
96,259 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 6. BY -PRODUCTS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (a) |
Pig Iron |
|
|
|
|
|
|
|
|
|
CPI ( All types incl. imported) |
|
|
|
59,150 |
|
#### |
2726 |
48,151 |
|
|
|
CPI (off grade/CPI-S) |
|
|
|
52,450 |
|
#### |
2346 |
41,446 |
|
|
|
FPI - 5 /
6 / 5S / 6S / 5HMn
/ 6HMn/ HSi/ Off Grade |
|
|
62,200 |
|
#### |
2898 |
51,198 |
|
|
|
FPI - 4 / 4S
/ 4HMn |
|
|
|
69,150 |
|
#### |
3291 |
58,146 |
|
|
|
FPI - 3 /
3S / 3HMn |
|
|
|
69,150 |
|
#### |
3291 |
58,146 |
|
|
|
FPI - 2 / 2S
/ 2HMn |
|
|
|
70,000 |
|
#### |
3340 |
59,000 |
|
|
|
FPI - 1 /
1S / 1HMn |
|
|
|
70,370 |
|
#### |
3360 |
59,365 |
|
|
|
Pig Iron Residue |
|
|
|
|
42,061 |
|
#### |
2036 |
35,961 |
|
|
|
Pig Iron (Dust) |
|
|
|
|
40,232 |
|
#### |
1932 |
34,132 |
|
|
|
Pig Iron Disc Scrap |
|
|
|
|
47,180 |
|
#### |
2622 |
46,322 |
|
|
|
|
|
|
|
|
|
|
|
| (b) |
Hard Coke |
|
|
|
|
|
|
|
48151 |
|
|
|
1.1 Coke Dust
( 0 - 1 mm ) Bulk in Loose form |
|
|
|
17,171 |
|
41446 |
|
|
|
1.2 Coke Dust
( 0 - 1 mm ) Packed in 50 kg Bags |
|
|
|
18,192 |
|
51198 |
|
|
|
2. Coke Breeze (0 - 10 mm) |
|
|
|
23,257 |
|
58146 |
|
|
|
3. Coke Breeze (0 - 15 mm) |
|
|
|
28,600 |
|
58146 |
|
|
|
4. Coke Breeze ( 0 - 20 mm ) |
|
|
|
30,579 |
|
59000 |
|
|
|
5. Coke Breeze ( 0 - 25 mm ) |
|
|
|
38,105 |
|
59365 |
|
|
|
6. Coke Breeze
(10-15 mm) |
|
|
|
39,954 |
|
35961 |
|
|
|
7. Coke 25mm to 80mm (Subject to
availability) |
|
|
|
64,512 |
|
34132 |
|
|
|
8. Coke Over 80mm |
|
|
|
69,232 |
|
46322 |
|
|
| Note: |
|
|
|
|
|
|
|
|
|
Extra charges @ Rs. 200/-
PMT for allowing hand picking of Coke size +80mm by labours/workers |
|
|
|
|
deployed by the buyers on
their account shall be payable at the time of obtaining Delivery Order(s). |
|
|
|
|
|
|
|
|
|
|
|
|
| (c) |
Ammonium Sulphate |
|
|
|
|
|
|
|
|
Bulk: in loose form |
|
|
|
17,000 |
|
|
|
|
Packed: in 50 kg bags |
|
|
|
17,300 |
|
|
|
|
|
|
|
|
|
|
|
|
| (d)
Coal Tar |
|
38,000 |
|
|
|
|
|
|
|
|
|
|
|
| (e) |
HSD (Used) |
|
|
|
|
59,500 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (f) |
Slag |
|
|
|
|
|
|
|
|
| |
Granulated |
|
|
|
|
795 |
|
750 |
45 |
795 |
|
|
|
BF Boulder Slag (BF
waste: Product Code: 906) |
|
|
|
80 |
|
75 |
5 |
80 |
|
|
|
Convertor Slag |
|
|
|
|
583 |
|
550 |
33 |
583 |
|
|
|
Boulder Slag alongwith
HMLR contents |
|
|
|
696 |
|
625 |
38 |
663 |
|
|
| (g) |
Oxygen/Nitrogen |
(in Cu.m.) |
|
|
|
30 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| (h) |
HMLR |
|
|
|
31,461 |
|
#### |
1710 |
30210 |
|
|
|
|
|
|
|
|
|
|
0 |
0 |
|
|
| (i) |
Runner Scrap |
|
|
|
37,291 |
|
#### |
2094 |
36994 |
|
|
|
|
|
|
|
|
|
|
0 |
0 |
|
|
| (j) |
Steel Metal Ladle
Residue (SMLR) Scrap |
|
|
|
32,864 |
|
#### |
1320 |
23320 |
|
|
|
|
|
|
|
|
|
|
|
| (k) |
Steel Scrap Retrieved
from Converter Slag |
|
|
|
|
|
|
|
|
i. 0-60mm |
|
|
|
10,634 |
|
9,500 |
570 |
10,070 |
|
|
|
ii. 05-60mm |
|
|
|
12,873 |
|
#### |
690 |
12,190 |
|
|
|
iii. 30-60mm |
|
|
|
19,589 |
|
#### |
1050 |
18,550 |
|
|
|
iv. 60-300mm |
|
|
|
24,627 |
|
#### |
1320 |
23,320 |
|
|
|
v. Over 300mm |
|
|
20,373 |
|
#### |
1092 |
19,292 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (l) |
Tar Bonded Dolomite (TBD)
Bricks (In all grades/sizes/shapes) |
|
34,000 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (m) |
Chamote Powder |
|
|
|
|
|
|
|
|
i. 0-3mm |
|
|
|
|
5,900 |
|
|
|
|
ii. 0-20mm |
|
|
|
|
5,900 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| (n) |
Tundish Well Block CN-42 |
|
|
|
37,250 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (o) |
Bricks Fire Clay in all
sizes & Shapes |
|
|
|
40,000 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (p) |
i. Calcined Dolomite (Dead Burnt
Dolomite) |
|
|
|
13,450 |
|
|
|
|
ii. Calcined Lime (Burnt Lime) Size 0-10
mm |
|
|
|
5,400 |
|
|
|
|
iii. Calcined Lime (Burnt
Lime) Size 10-50 mm |
|
|
|
5,400 |
|
|
|
|
|
|
|
|
|
|
|
|
| (q) |
Mortar |
|
|
|
|
41,000 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| (r) |
Burnt Refractory Bricks
(Mixed) |
|
|
|
11,500 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (s)
Bulk Hot Metal Skull |
|
|
|
31350 |
|
#### |
1380 |
#### |
|
| (t) |
Pressed & Bundled
Steel Scrap |
|
|
|
35821 |
|
#### |
1920 |
#### |
|
|
| (u)
Mis-Cast Steel Heavy Scrap |
|
36940 |
|
#### |
1980 |
#### |
|
| (v) |
Scarfing Cinder |
|
|
6,934 |
|
| Note: |
|
|
|
|
|
| i) |
The prices are subject to
change without notice. |
|
|
|
|
|
|
|
| ii) |
Items, whose prices have
not been indicated in this price list, are not to be offered for sale. |
|
|
|
| iii) |
All materials shall be allocated subject to availability. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
