 Hot
rolled carbon steel coils, sheets, strips and plates
are produced at our 1700mm Hot Rolling Strip
Mill.
Uses.
Seam Welded Pipes for Gas/Water/Oil.
Storage Tanks, Vessels, Containers.
Ships/Barges, Launches & Floating Structures.
Fabricated Sections/Structures.
General Purpose Sheets/Plates.
Wheel Rims.
Formed Sections, Steel Flooring and Cold Rolled Products.
Standard
Sizes Of Hot Rolled Sheets As Rolled Edges In (mm)
Thickness
(mm) |
Min.
& Max. Sheet Lengths per Width (W) |
1000
(W) |
1220
(W) |
1500
(W) |
1.6,
2.0 |
2440 |
2440 |
- |
2.35 |
- |
2440 |
- |
2.65,
2.90 |
2440 |
2440 |
- |
3.25,
3.65 |
2440 |
2440,
6000 |
2440,
3000, 6000 |
3.90,
5.0, 6.0 |
2440,
6000 |
2440,
6000 |
2440,
3000, 6000 |
7.0,
8.0, 9.0, 10.0, 12.0 |
2440,
6000 |
2440,
6000 |
2440,
3000, 6000 |
Standard
Sizes Of Hot Rolled Coils |
Width
As Rolled (mm) |
Thickness
Of Hot Rolled Coils (mm) |
1000
& 1220 |
1.6,
2.0, 2.35, 2.65, 2.90, 3.25, 3.65, 3.9, 4.0, 4.5,
5.0, 6.0, 6.5, 7.0, 8.0, 9.0, 10.0, 12.0 |
1500 |
2.90,
3.25, 3.65, 3.9, 4.0, 4.5, 5.0, 6.0, 6.5, 7.0,
8.0, 9.0, 10.0, 12.0 |
NOTE:
Hot rolled carbon steel coils can be supplied in other
dimensions (width and thickness) if ordered in substantial
quantity.
1.6 to 6.0mm can be supplied in pickled and oiled state
as well, upon mutual agreement.
H.R. sheets/coils (trimmed) edges would be 50mm less
than the width of rolled edges.
Allowable
Telescopicity In Hot Rolled Coils |
Thickness(mm) |
Width |
Telescopic
Value |
Upto
& Incl. 2.5 |
Upto
& Incl. 800
over 800 |
50
100 |
Over
2.5 |
Upto
& Incl. 800
over 800 |
35
70 |
NOTE:
Coils having one inner or outer ring above the coil
edge should not be considered a telescopic coil.
Loosing of two outer rings of the coil cannot be considered
a reject.
 Edge
Condition
Cracks or torn edges on the mill edges shall be within
one half of the width tolerance.
Local bent edges (angle 90° or less) are allowed.
Camber Tolerances For Coils
And Cut Lengths
Coils -- 25mm in any 5000mm length sheets -- 0.5% x
length.
|
