|
 |
Tenders
Raised By The Spare Parts Management & Department |
| |
| |
Dated:
10.09.2009 |
|
PAKISTAN
STEEL
SPARE PARTS MANAGEMENT & DEVELOPMENT
TENDER
NOTICE NO. SPM&D- 02 /010
| Sr. No. |
Description
of Item |
No.
Of. Item |
Case
No. |
Opening
Date |
Scope
of Work |
Tender
Fee (Rs) |
| 1. |
Repair of Motor
(75 K.W) |
01 |
E-842 |
06-10-09 |
Electrical
(Heavy Repair)
|
200/- |
| 2 |
Roller
Turn Over (Ø300) |
01 |
P-5796 |
06-10-09 |
Heavy Forging/ Machining
(Deep Drilling) & Heat Treatment |
200/- |
1. Spare Parts Vendors enlisted
with SPM&D are invited to submit bids on
FOR, Bin Qasim, Karachi.
2. Tender documents shall be
issued as per scope of work mentioned against
each item, to bidders having requisite facilities.
3. Tender documents may be
collected from the I/C. (SPM&D), Operation
Building either in person or on a written request
on payment of Tender fee (Non-refundable) in
the form of pay order/bank draft in favour of
Pakistan Steel, as mentioned against each item.
4. Sealed bids addressed to
Incharge (SPM&D) so as to reach this office
on or before the date of opening by 10.30 A.M.
on either by registered post or may be deposited
in R&I Section of Pakistan Steel, Bin Qasim
Karachi. Tenders will be opened at 11.00 A.M.
on the opening date in the presence of the bidders,
who may like to attend. No. tender documents
will be sold/issued on the tender opening date.
5. Complete case No. and subject
of tender along with opening date should be
clearly mentioned on left top corner of the
envelope.
6. The Invitation of bids is
also available at the following websites.
PS website: http://www.paksteel.com.pk/
PPRA website: http://www.ppra.org.pk/
7. Pakistan Steel reserves
the rights to accept or reject any or all of
the offers as per rules.
8. Manufacturers/Firms not
enlisted but having requisite-manufacturing
capabilities may get them enlisted with SPM&D
(Pakistan Steel) for future participation.
INCHARGE
(SPM&D)
|
Dated:
11.11.2009 |
| |
PAKISTAN
STEEL
SPARE PARTS MANAGEMENT & DEVELOPMENT
TENDER
NOTICE NO. SPM&D- 03 /010
| Sr. No. |
Description
of Item |
No.
Of. Item |
Case
No. |
Opening
Date |
Scope
of Work |
Tender
Fee (Rs) |
| 1. |
Compensator |
01 |
P-5872 |
08-12-09 |
Light Fabrication
|
200/- |
2. |
Diaphragm |
07 |
P-5875 |
08-12-09 |
Rubber |
200/- |
| 3 |
Repair
of Motor (75.kw)(Ø300) |
01 |
E-842 |
08-12-09 |
Electrical (Heavy
Repair) |
200/- |
1. Spare Parts Vendors enlisted
with SPM&D are invited to submit bids on
FOR, Bin Qasim, Karachi.
2. Tender documents shall be
issued as per scope of work mentioned against
each item, to bidders having requisite facilities.
3. Tender documents may be
collected from the I/C. (SPM&D), Operation
Building either in person or on a written request
on payment of Tender fee (Non-refundable) in
the form of pay order/bank draft in favour of
Pakistan Steel, as mentioned against each item.
4. Sealed bids addressed to
Incharge (SPM&D) so as to reach this office
on or before the date of opening by 10.30 A.M.
on either by registered post or may be deposited
in R&I Section of Pakistan Steel, Bin Qasim
Karachi. Tenders will be opened at 11.00 A.M.
on the opening date in the presence of the bidders,
who may like to attend. No. tender documents
will be sold/issued on the tender opening date.
5. Complete case No. and subject
of tender along with opening date should be
clearly mentioned on left top corner of the
envelope.
6. The Invitation of bids is
also available at the following websites.
PS website: http://www.paksteel.com.pk/
PPRA website: http://www.ppra.org.pk/
7. Pakistan Steel reserves
the rights to accept or reject any or all of
the offers as per rules.
8. Manufacturers/Firms not
enlisted but having requisite-manufacturing
capabilities may get them enlisted with SPM&D
(Pakistan Steel) for future participation.
INCHARGE
(SPM&D)
|
Dated:
18.03.2010 |
PAKISTAN
STEEL
SPARE PARTS MANAGEMENT & DEVELOPMENT
TENDER
NOTICE NO. SPM&D- 04 /010
| Sr. No. |
Description
of Item |
No.
Of. Item |
Case
No. |
Opening
Date |
Scope
of Work |
Tender
Fee (Rs) |
| 1. |
Plate Middle |
01 |
P-5992 |
6-4-2010 |
Light Machining/
Fabrication |
200/= |
| 2 |
Hook |
01 |
P-6008 |
6-4-2010 |
Light Machining/Forging |
200/= |
| 3 |
Air Cooler Bunch Assy |
01 |
P-5848 |
6-4-2010 |
Light Fab/ Machining |
200/= |
| 4 |
Rotor Assy |
01 |
P-5724 |
6-4-2010 |
Medium Fab/ Machining |
500/= |
| 5 |
Forged Shaft Blank |
02 |
P-5894 |
6-4-2010 |
Medium Casting/ Forging |
200/= |
| 6 |
Contact Fix & Moveable |
02 |
E-845 |
8-4-2010 |
Electrical |
300/= |
| 7 |
Spring Compression |
01 |
P-6038 |
8-4-2010 |
Light Fabrication |
200/= |
| 8 |
Seal Ring |
01 |
P-6082 |
8-4-2010 |
Rubber |
200/= |
| 9 |
Terminal Block |
03 |
E-848 |
8-4-2010 |
Electrical |
200/= |
| 10 |
Transition Piece-2 |
01 |
P-6037 |
8-4-2010 |
Med Fab/ Machining |
200/= |
1. Spare Parts
Vendors enlisted with SPM&D are invited
to submit bids on FOR, Bin Qasim, Karachi.
2. Tender documents shall be
issued as per scope of work mentioned against
each item, to bidders having requisite facilities.
3. Tender documents may be
collected from the I/C. (SPM&D), Operation
Building either in person or on a written request
on payment of Tender fee (Non-refundable) in
the form of pay order/bank draft in favour of
Pakistan Steel, as mentioned against each item.
4. Sealed bids addressed to
Incharge (SPM&D) so as to reach this office
on or before the date of opening by 10.30 A.M.
on either by registered post or may be deposited
in R&I Section of Pakistan Steel, Bin Qasim
Karachi. Tenders will be opened at 11.00 A.M.
on the opening date in the presence of the bidders,
who may like to attend. No. tender documents
will be sold/issued on the tender opening date.
5. Complete case No. and subject
of tender along with opening date should be
clearly mentioned on left top corner of the
envelope.
6. The Invitation of bids is
also available at the following websites.
PS website: http://www.paksteel.com.pk/
PPRA website: http://www.ppra.org.pk/
7. Pakistan Steel reserves
the rights to accept or reject any or all of
the offers as per rules.
8. Manufacturers/Firms not
enlisted but having requisite-manufacturing
capabilities may get them enlisted with SPM&D
(Pakistan Steel) for future participation.
INCHARGE (SPM&D)
|
21-04-2010 |
PAKISTAN
STEEL
SPARE PARTS MANAGEMENT & DEVELOPMENT
TENDER
NOTICE NO. SPM&D- 05 /010
| Sr. No.
|
Description
of Item |
No.
Of. Item |
Case
No. |
Opening
Date |
Scope
of Work |
Tender
Fee (Rs) |
| 1. |
Friction Block |
01 |
P
– 6079 |
11-05-2010 |
Light Machining
|
200/- |
| 2. |
Seal Ring |
01 |
P
– 6082 |
11-05-2010 |
Rubber |
200/- |
| 3. |
Plate (Middle) |
01 |
P
– 5992 |
11-05-2010 |
Light Machining
/ Fabrication |
200/- |
| 4. |
Hook |
01 |
P
– 6008 |
11-05-2010 |
Light Machining
/ Forging |
200/- |
| 5. |
Air Cooler Bunch Assy. |
01 |
P
– 5848 |
11-05-2010 |
Light Fab
/ Machining |
200/- |
| 6. |
Rotor Assy. |
01 |
P
– 5724 |
13-05-2010 |
Medium Fab
/ Machining |
500/- |
| 7. |
Forged Shaft Blank |
02 |
P
– 5894 |
13-05-2010 |
Medium Casting
/ Forging |
200/- |
| 8. |
Transition Piece – 2 (Assy.) |
01 |
P
– 6037 |
13-05-2010 |
Medium Fab
/
Machining |
200/- |
| 9. |
Roll (forming) |
01 |
P
– 5850 |
13-05-2010 |
Heavy Forging
/ Machining |
200/- |
1. Spare Parts
Vendors enlisted with SPM&D are invited
to submit bids on FOR, Bin Qasim, Karachi.
2. Tender documents shall
be issued as per scope of work mentioned against
each item, to bidders having requisite facilities.
3. Tender documents may be
collected from the I/C. (SPM&D), Operation
Building either in person or on a written
request on payment of Tender fee (Non-refundable)
in the form of pay order/bank draft in favour
of Pakistan Steel, as mentioned against each
item.
4. Sealed bids addressed
to Incharge (SPM&D) so as to reach this
office on or before the date of opening by
10.30 A.M. on
either by registered post or may be deposited
in R&I Section of Pakistan Steel, Bin
Qasim Karachi. Tenders will be opened at 11.00
A.M. on the opening date in the presence
of the bidders, who may like to attend. No.
tender documents will be sold/issued on the
tender opening date.
5. Complete case No. and
subject of tender along with opening date
should be clearly mentioned on left top corner
of the envelope.
6. The Invitation of bids
is also available at the following websites.
PS website: http://www.paksteel.com.pk/
PPRA website: http://www.ppra.org.pk/
7. Pakistan Steel reserves
the rights to accept or reject any or all
of the offers as per rules.
8. Manufacturers/Firms not
enlisted but having requisite-manufacturing
capabilities may get them enlisted with SPM&D
(Pakistan Steel) for future participation.
INCHARGE (SPM&D)
|
Date
26-05-2010 |
PAKISTAN
STEEL
SPARE PARTS MANAGEMENT & DEVELOPMENT
TENDER
NOTICE NO. SPM&D – 06/ 010
| Sr. No. |
Description
of Item |
No.
Of. Item |
Case
No. |
Opening
Date |
Scope
of Work |
Tender
Fee (Rs) |
| 1. |
Friction Block |
01 |
P
– 6079 |
22-06-2010 |
Press Asbestos |
200/- |
| 2. |
Rubber Hose Pipe Assy:
With End Fittings
|
02 |
P
– 6085 |
22-06-2010 |
Light Machining |
300/- |
| 3. |
Roller Assy: |
01 |
P
– 6007 |
22-06-2010 |
Cast Iron
Centrifugal Casting / Machining |
300/- |
| 4. |
Screw for Mud Gun |
01 |
P
– 6035 |
22-06-2010 |
Heavy Forging
/ Machining |
200/- |
| 5. |
Rotor Assy:
Stainless Steel Impeller
|
01 |
P
– 5724 |
22-06-2010 |
Heavy Fabrication
/ Machining |
500/- |
| 6. |
Transition piece – 2 Assy: |
01 |
P
– 6037 |
24-06-2010 |
Medium Fab
/ Machining |
200/- |
| 7. |
Roll (Forming) |
01 |
P
– 5850 |
24-06-2010 |
Heavy Forging
/ Machining |
200/- |
| 8. |
Roller Assy: |
01 |
P
– 5893 |
24-06-2010 |
Heavy Forging
/ Machining |
300/- |
| 9. |
Shell |
01 |
P
– 5754 |
24-06-2010 |
Heavy Forging
/ Machining |
200/- |
1. Spare Parts Vendors enlisted with SPM&D
are invited to submit bids on FOR, Bin Qasim,
Karachi.
2. Tender documents shall be issued as per scope
of work mentioned against each item, to bidders
having requisite facilities.
3. Tender documents may be collected from the
I/C. (SPM&D), Operation Building either
in person or on a written request on payment
of Tender fee (Non-refundable) in the form of
pay order/bank draft in favour of Pakistan Steel,
as mentioned against each item.
4. Sealed bids addressed to Incharge (SPM&D)
so as to reach this office on or before the
date of opening by 10.30
A.M. on either by registered post or
may be deposited in R&I Section of Pakistan
Steel, Bin Qasim Karachi. Tenders will be opened
at 11.00 A.M. on
the opening date in the presence of the bidders,
who may like to attend. No. tender documents
will be sold/issued on the tender opening date.
5. Complete case No. and subject of tender along
with opening date should be clearly mentioned
on left top corner of the envelope.
6. The Invitation of bids is also available
at the following websites.
PS website: http://www.paksteel.com.pk/
PPRA website: http://www.ppra.org.pk/
7. Pakistan Steel reserves the rights to accept
or reject any or all of the offers as per rules.
8. Manufacturers/Firms not enlisted but having
requisite-manufacturing capabilities may get
them enlisted with SPM&D (Pakistan Steel)
for future participation.
INCHARGE (SPM&D)
|
|
1st July 2010 |
|
PAKISTAN STEEL
SPARE PARTS MANAGEMENT & DEVELOPMENT
TENDER
NOTICE NO. SPM&D – 01/ 011
|
Sr. No. |
Description of Item |
No. Of. Item |
Case No. |
Opening Date |
Scope of Work |
Tender Fee (Rs) |
|
1. |
Gear 02 type |
02 |
P – 5991 |
22-07-2010 |
Medium / Forging
& Machining |
200/- |
|
2. |
Guide (Dummy Bar)
& Frame (Strand Tail) |
02 |
P – 6071 |
22-07-2010 |
Medium Fab / Machining |
300/- |
|
3. |
Shaft (Pinion) &
Gear Bevel |
02 |
P – 6083 |
22-07-2010 |
Spiral Bevel Gears |
200/- |
|
4. |
Roller |
01 |
P – 6007 |
22-07-2010 |
Cast Iron Heavy Centrifugal
Casting / Machining |
300/- |
|
5. |
Screw for Mud Gun |
01 |
P – 6035 |
22-07-2010 |
Heavy Forging / Machining |
200/- |
|
6. |
Rubber Hose Pipe
Assy with End Fittings |
02 |
P – 6085 |
27-07-2010 |
Light Machining |
300/- |
|
7. |
Rotor Assy
Stainless Steel Impeller |
01 |
P – 5724 |
27-07-2010 |
Heavy Fabrication
/ Machining |
500/- |
|
8. |
Roller Assy |
01 |
P – 5893 |
27-07-2010 |
Heavy Forging / Machining |
300/- |
|
9. |
Shaft For Rotor |
01 |
P – 5960 |
27-07-2010 |
Heavy Forging / Machining |
200/- |
-
Spare Parts Vendors enlisted with SPM&D
are invited to submit bids on FOR, Bin Qasim,
Karachi.
-
Tender documents shall be issued as per scope
of work mentioned against each item, to bidders
having requisite facilities.
-
Tender documents may be collected from the
I/C. (SPM&D), Operation Building either
in person or on a written request on payment
of Tender fee (Non-refundable) in the form
of pay order/bank draft in favour of Pakistan
Steel, as mentioned against each item.
-
Sealed bids addressed to Incharge (SPM&D)
so as to reach this office on or before the
date of opening by 10.30 A.M. on either by
registered post or may be deposited in R&I
Section of Pakistan Steel, Bin Qasim Karachi.
Tenders will be opened at 11.00 A.M. on the
opening date in the presence of the bidders,
who may like to attend. No. tender documents
will be sold/issued on the tender opening
date.
-
Complete case No. and subject of tender along
with opening date should be clearly mentioned
on left top corner of the envelope.
-
The Invitation of bids is also available at
the following websites.
PS website:
http://www.paksteel.com.pk/
PPRA website:
http://www.ppra.org.pk/
Pakistan Steel Mills Corporation (Pvt.) Ltd.
NTN # 34-01-0711555-5
STRN # 02-04-7213-006-91
-
Pakistan Steel reserves the rights to accept
or reject any or all of the offers as per
rules.
-
Manufacturers/Firms not enlisted but having
requisite-manufacturing capabilities may get
them enlisted with SPM&D (Pakistan Steel)
for future participation.
INCHARGE (SPM&D)
|
05.08.2010 |
PAKISTAN
STEEL
SPARE PARTS MANAGEMENT & DEVELOPMENT
TENDER
NOTICE NO. SPM&D – 02/ 11
| Sr. No. |
Description
of Item |
No.
Of. Item |
Case
No. |
Opening
Date |
Scope
of Work |
Tender
Fee (Rs) |
| 1. |
Gear 02 type |
02 |
P –
5991 |
26-08-2010 |
Medium Casting,
Forging & Machining |
200/- |
| 2. |
Shaft (Pinion) & Gear Bevel
|
02 |
P
– 6083 |
26-08-2010 |
Manufacturing
of Spiral Bevel Gears |
200/- |
| 3. |
Guide (Dummy Bar) & Frame (Strand Tail) |
02 |
P
– 6071 |
26-08-2010 |
Medium Fab:
/ Machining |
300/- |
| 4. |
Air Cooler Assy |
01 |
P
– 5677 |
26-08-2010 |
Medium Fab:
/ Machining |
500/- |
| 5. |
Circuit Breaker (Vacuum) |
01 |
P
– 851 |
31-08-2010 |
Electrical |
200/- |
| 6. |
Oil Seals & Rubber Ring |
04 |
P
– 6106 |
31-08-2010 |
Rubber |
200/- |
| 7. |
Transition Piece – 2 Assy |
01 |
P
– 6037 |
31-08-2010 |
Medium Fab:
/ Machining |
200/- |
1. Spare Parts Vendors enlisted with SPM&D
are invited to submit bids on FOR, Bin Qasim,
Karachi.
2. Tender documents shall be issued as per scope
of work mentioned against each item, to bidders
having requisite facilities.
3. Tender documents may be collected from the
I/C. (SPM&D), Operation Building either
in person or on a written request on payment
of Tender fee (Non-refundable) in the form of
pay order/bank draft in favour of Pakistan Steel,
as mentioned against each item.
4. Sealed bids addressed to Incharge (SPM&D)
so as to reach this office on or before the
date of opening by 10.30 A.M. on either by registered
post or may be deposited in R&I Section
of Pakistan Steel, Bin Qasim Karachi. Tenders
will be opened at 11.00 A.M. on the opening
date in the presence of the bidders, who may
like to attend. No. tender documents will be
sold/issued on the tender opening date.
5. Complete case No. and subject of tender along
with opening date should be clearly mentioned
on left top corner of the envelope.
6. The Invitation of bids is also available
at the following websites.
PS website: http://www.paksteel.com.pk/
PPRA website: http://www.ppra.org.pk/
Pakistan Steel Mills Corporation (Pvt.) Ltd.
NTN # 34-01-0711555-5 STRN # 02-04-7213-006-91
7. Pakistan Steel reserves the rights to accept
or reject any or all of the offers as per rules.
8. Manufacturers/Firms not enlisted but having
requisite-manufacturing capabilities may get
them enlisted with SPM&D (Pakistan Steel)
for future participation.
INCHARGE (SPM&D)
|
2-September-2010 |
PAKISTAN
STEEL
SPARE
PARTS MANAGEMENT & DEVELOPMENT
TENDER
NOTICE NO. SPM&D – 03/ 011
|
Sr.
No. |
Description
of Item |
No.
Of. Item |
Case
No. |
Opening
Date |
Scope
of Work |
Tender
Fee (Rs) |
| 1. |
Air Cooler Assy |
01 |
P –
5677 |
23-09-2010 |
Medium Fab:
/
Machining |
500/- |
| 2. |
Circuit Breaker (Vacuum) |
01 |
E –
851 |
23-09-2010 |
Electrical |
200/- |
| 3. |
Gear Wheel |
01 |
P –
6111 |
23-09-2010 |
Heavy Forging
/
Machining |
200/- |
| 4. |
Rolling of Round Bar in different Dias |
07 |
P –
6089 |
23-09-2010 |
Re-Rolling
of Billets into
Round Bar |
200/- |
| 5. |
Diaphragm |
04 |
P –
6095 |
23-09-2010 |
Rubber |
200/- |
- Spare Parts Vendors enlisted with SPM&D are invited
to submit bids on FOR, Bin Qasim, Karachi.
- Tender documents shall be issued as per scope of work
mentioned against each item, to bidders
having requisite facilities.
- Tender documents may be collected from the I/C. (SPM&D),
Operation Building either in person or on
a written request on payment of Tender fee
(Non-refundable) in the form of pay order/bank
draft in favour of Pakistan Steel, as mentioned
against each item.
- Sealed bids addressed to Incharge (SPM&D) so as
to reach this office on or before the date
of opening by 10.30 A.M. on either by registered
post or may be deposited in R&I Section
of Pakistan Steel, Bin Qasim Karachi. Tenders
will be opened at 11.00 A.M. on the opening
date in the presence of the bidders, who
may like to attend. No. tender documents
will be sold/issued
on the tender opening date.
- Complete case No. and subject of tender along with opening
date should be clearly mentioned on left
top corner of the envelope.
- The Invitation of bids is also available at the following
websites.
PS
website: http://www.paksteel.com.pk/
PPRA
website: http://www.ppra.org.pk/
Pakistan Steel Mills Corporation (Pvt.)
Ltd. NTN # 34-01-0711555-5
STRN # 02-04-7213-006-91
- Pakistan Steel reserves the rights to accept or reject
any or all of the offers as per rules.
- Manufacturers/Firms not enlisted but having requisite-manufacturing
capabilities may get them enlisted with
SPM&D (Pakistan Steel) for future participation.
INCHARGE (SPM&D)
|
| |
| |
|
|
|
| |
|
