PS ANNUAL PROCUREMENT PLAN (2005-06)
	POWER TOOLS
	Back
	ITEMCODE	UOM	A.A.C.	DESCRIPTION
	0511000065	NOS	2	DRILL ELECTRIC  0400-0450 RPM,220V AC,CHUCK       SIZE=19MM,DRIVE BALL BEARING WITH WRENCH.
	0511000073	NOS	4	DRILL ELECTRIC  500 RPM,220V AC,600W,CHUCK        SIZE=13MM,DRIVE BALL BEARING WITH WRENCH & HANDLE
	0511000081	NOS	31	GRINDER,BABY ELECT. 9000-12000RPM, 220V AC,600W,  DISC SIZE=100X6X16MM,L=9"-12" DOUBLE INSULATION
	0511000090	NOS	4	GRINDER, ELECTRIC. 6000-8000RPM, 240V AC,2000W,   DISC SIZE=225MM (9")
	0511000120	NOS	3	BLOWER(DUST) S/PHASE 110/220 HZ 50-60 WATT 600 AMP2.8-5.7 AIR PR:560MM HG AIR VOL:2.8M3/MIN RPM16000
	0511000138	NOS	19	HAND GRINDER                 DISC DIA=180MM       RPM 7000, 220-240V, 12A, O.A.L 15"-20"
	0511000146	NOS	1	ELECTRIC DRILL MACH.HANDE)   220.V 420W           MEX. 6MM, M:1650
	0511000219	NOS	1	CUT-OFF M/C (PORTABLE)  SIZE=12"  "HITACHI" OR EQ.CAP.BAR 65MM,PIPE=114-130,1450+2200W,3500-3800RPM.
	0512000069	NOS	4	RAMMER (SAND) PNEUMATIC      BLOW 700MIN, L=1075MMPISTON 32MM, STROKE 127MM, PRESSURE= 5-6KG/CM2
	0512000077	NOS	6	HAMMER(ROUND SHANK)PNEUMATIC BLOW 2500MIN, L=342MMPISTON 28.5MM, STROKE 51MM, PRESSURE= 5-6KG/CM2
	0512000085	NOS	1	GRINDER (ANGLE) PNEUMATIC    WHEEL 180X6X22       7000-8000 RPM, PRESSURE= 5-6KG/CM2
	0519000021	NOS	2	GRINDER (HAND) COMMUTATOR    ID:15XOD:38XL=27MM   COMMUTATOR -32 SAGMENT.
	0519000030	NOS	2	GRINDER (BODY) COMMUTATOR    ID:10.5XOD:23XL=18MM COMMUTATOR -24 SAGMENT.
	0511000073	SET	6	Drill Machine Electric 500 RPM, 200 volt, 600 wt chuck size 13mm,Drive Ball Bearing with wrench and handle
	0511000138	NOS	6	Hand Grinder, Disk Dia 180 mm, RPM 7000,220 volt -240, 12 Amp, O.A Length 15" - 20"
	0511000162	NOS	6	Shear cutter (plated) Elect.Modle-KS-25 or equil, cutting cap up to 25 mm, power in put 500W, 220-240V
	0512000069	NOS	6	Rammer (sand) pneumatic Blow 700 min, length 1075 mm piston 32 mm, Stroke. 127 mm, pressure 5 – 6 KGM / CM².
	0512000077	NOS	6	Hammer (Round) Shank pneumatic, Blow 2500min, length 342 mm, Piston 285 mm, Stroke51mm, Pressure 5-6 KGM / CM².
	Back